high voltage

57 Commerce Drive, Brookfield CT 06804 | Tel: 203-740-8555 | Fax: 203-740-9555

XRC, XRS SERIES

60-450kV, 3-140kW X-Ray

A stable range of Power Supplies suitable for many industrial, analytical, scientific, and medical X-Ray applications

Description

Universal Voltronics XRC and XRS Series power supplies combine a stable .05%, low-ripple high voltage power source with one or more filament supplies in one compact, well-proven package. This series offers models optimized for use in a wide variety of industrial, analytical, and medical applications.

Two key strengths of Universal Voltronics X-Ray power supplies are reliability and stability. These qualities are achieved through the use of modular circuit architectures that benefit from UVC’s 40+ years of high-voltage experience. Another contributor is the use of a proprietary solid high-dielectric encapsulation medium in most units, thus reducing weight and footprint. Finally, a deliberate “guard band” approach to the design uses components and systems with ratings that substantially exceed their typical in-service loads

Features

Standard Industrial Specifications

Output
Repeatability 0.03%
Accuracy 0.5% of set value ± 0.1kV
Long term drift 0.05% over 10hrs after 30min warm up
Temperature drift 50ppm/°C at set value
Line regulation ± 0.005%
Load regulation ± 0.05%
Voltage Ramp Up 0.1 sec to 0.3 sec for analog interface
0.1 sec to 10 sec for RS232 interface
Duty Cycle 100% continuous
MTBF >50,000 hours
Filament Outputs*
Filament Voltage 8VDC
Filament Current 6A
Ripple <1%
Input
Power Factor 0.9 or better
Customer Interface
Mains AC Input 3 position terminal strip

Industrial Product Matrix

Parameters 100kV 160kV 225kV 320kV 450kV
Output
DC Output Voltage 0-100kV 0-160kV 0-225kV 0 ± 160kV 0 ± 225kV
Output Current 30mA 40mA 30mA 30mA 30mA
Max Output Power 3kW 3kW 3kW 4kW 4kW
Polarity Negative Negative Negative Bi-Polar Bi-Polar
Efficiency >85% >85% >85% >85% >85%
Ripple/Noise
(peak-to-peak)		 0.1% 0.1% <0.15% 0.1% <0.15%
Input
Voltage Range 230VAC
(+10/-15%) 		230VAC
(+10/-15%) 		230VAC
(+10/-15%) 		230VAC
(+10/-15%) 		230VAC
(+10/-15%)
# Phases 1 1 1 1 1
Line Frequency 47-63Hz 47-63Hz 47-63Hz 47-63Hz 47-63Hz
Customer Interface
HV R-24 Cable Well R-24 Cable Well R-28 Cable Well 2 x R-24
Cable Well 		2 x R-28
Cable Well
Remote Control Interface Analog/RS232 Analog/RS232 Analog/RS232 Analog/RS232 Analog/RS232
Control AC Input IEC Inlet IEC Inlet IEC Inlet IEC Inlet IEC Inlet
Mechanical/Environmental
Size 19"W x
10.5"H x
22"D 		19"W x
10.5"H x
24"D 		19"W x
17.5"H x
33"D 		2 x (19"W x
10.5"H x
24"D) 		2 x (19"W x
17.5"H x
33"D)
Weight 100 lbs 135 lbs 250 lbs 270 lbs 500 lbs
Operating Temperature 0 to 40°C 0 to 40°C 0 to 40°C 0 to 40°C 0 to 40°C
Humidity 5 to 95%
non-condensing 		5 to 95%
non-condensing 		5 to 95%
non-condensing 		5 to 95%
non-condensing 		5 to 95%
non-condensing
Storage Temperature -20° to 85°C -20° to 85°C -20° to 85°C -20° to 85°C -20° to 85°C

Standard Analytical Specifications

Output
DC Output Power 3 & 4kW models available
Ripple/Noise 0.03% rms (0.085% p-p) <1kHz, 0.3% rms
(0.85% p-p) >1kHz
Output Voltage Regulation
Line + 0.005% High to Low Line
Load + 0.005% NL to FL
Temperature Coefficient, Vout 50ppm/°C
Long Term Stability 0.01% over 10hrs after 30min warmup
Accuracy <0.5%
Arc Protection Programmable Arc Counter.
1 to 32 arcs in 10 sec based on dI/dt detection
Emission Current Regulation
Line + 0.005% High to Low Line
Load 0.005%
Temperature Coefficient, Iem <50ppm/ °C
Long Term Stability <0.1% over 10 hours
Accuracy <0.5%
Agency Approvals
CE Compliant to EMC 89/336/EEC and LV 73/23EEC directives
Input
# Phases 1
Line Frequency 50/60Hz
Voltage Range 230VAC +10/-15% (195.5 - 253VAC)
Efficiency 85%
Power Factor >0.9; Active PFC
Filament Supply
Current 0-12A
Voltage Ramp Up Time Programmable from 20ms to 10 sec
when using RS232 control
Switching Frequency Ranges from 20 to 28kHz depending on kV ref
Operating Temperature 0 to 40°C
Operating Humidity 5 to 95% non-condensing
Storage Temperature -20 to 85°C
Storage Humidity 5 to 95% non-condensing
Dimensions 19”W x 5.25”H x 22”D
Weight <65lbs
MTBF >50,000 hrs
Control Interface RS232 or Analog Interface

Analytical Product Matrix

Parameters X-Ray Diffraction X-Ray Fluorescence
Output
DC Output Voltage - 60kV + 70kV
Output Rated Current Negative Positive
Max Output Power 0-125mA 0-150mA
Polarity 4kW 4kW
Emission Current Regulation
Line 230VAC
(+10/-15%) 		230VAC
(+10/-15%)
Load 1 1
Long Term Stability 47-63Hz 47-63Hz
Filament Supply
Voltage, Current 0-13VDC, 12A 0-15VDC, 12A
Ripple 1%rms<100Hz, 3%>100Hz 1%rms<100Hz
Interface HV Receptacle US Fed std 3 pin
C, S, shorted 		US Fed std 3 pin
C, L, S, shorted

Dimensions

coming soon

Pin Out

coming soon

Printable Brochures and Other Printable Brochures and Other Downloads